High Quality CoreBarrel Is Used In Rock Coring, Core Barrel Is Used For, Core Barrel Is Use Full For Suppliers in China

Home > Products > Bearing Adapter Sleeve > Core Barrel Assembly B

Core Barrel Assembly B

  • Core Barrel Assembly B
  • Core Barrel Assembly B

Core Barrel Assembly B

    Payment Type: L/C,T/T
    Terms of Trade: FOB,CFR
    Min. Order: 1 Bag/Bags
    Delivery Time: 15 Days
    Packaging: Case
    Brand: APR
    Transportation: Ocean,Land
    Port: SHANGHAI

Basic Info

Model No.: BQ

Product Description


Bq Nq Hq Pq Double Tube Wireline Head Assembly Core Barrel Assembly

Drilling Tool Assembly (p, h, n And b)

Relevant Description Of Products:

Retrieve The Inner Tube With An Overshot Without Lifting Out The Whole Rods String To Obtain The Core, The Wireline Coring System Lifts The Underground Core Sample Out Of The Borehole Through The Overshot To Take Back The Entire Inner Tube And Conduct Sampling Analysis. This Improves Productivity Of The Work Site And Guarantees Safety Of Core Sample During Drilling Down.

The System Is Realized Through a Fully Independent Inner Tube. During Its Working, The Inner Tube Does Not Connect With The Overshot But Locates At The Bottom Of The Coring Drilling Rod Directly (Behind The Coring Drilling Bit). An Assembly Device Is Installed On Top Of The Inner Tube, Which Includes Coring And Recycling Functions. When The Inner Tube Is Full Of Core Sample, The Overshot Is Placed To The Bottom From The Borehole Through a Steel Wire Rope And Lifted Out By a Winch. After The Inner Tube Assembly Is Lifted To The Surface, An Empty Inner Tube Is Placed To The Bottom Of The Hole To Recover The Drilling. This Improves Well Drilling Efficiency.

Our Company Provides Core Barrel Assmeblies Of Different Diameters To Meet Customers' Demands. The Wireline Coring System Is Applicable For Most Drilling Conditions And Standard Dcdma Hole Sizes (b, n, h And p).

Currently, The Company Provides Two Models Of Wireline Coring Systems: Double-Tube And Triple-Tube

Core Barrel Assembly: It Consists Of Inner Tube And Outer Tube Groups.

The Inner Part Consists Of The Following Parts: Spearhead Assemly, Retrival Components, Core Sample Collection Component, Landing Shoulder, Stop Ring And Other Parts.Inner Tube Group, Independent From Outer Tube Group, Collects Core Sample Sample During Well Drilling.

The Outer Tube Part Consists Of Parts , Which Includes Locking Coupling, Adapter Coupling, Outer Tube, Etc. The Outer Tube Group That Is Kept At The Bottom Of The Hole All The Time Holds The Inner Tube Assembly During Drilling.

The Triple Tube Coring System q 3 Has The Same Components As The Dual-Tube. And Its Interior Has a Third Tube That Is Known As Liner Tube Of The Inner Tube.

Liner Tube Of The Inner Tube Is Placed In The Inner Tube. The Triple Tube

System Can Realize Overall Recovery Ratio Of Core Sample When Drilling Stratum With Coal, Clay Or Bigger Crack. The Liner Tube Or Split Tube Keeps The Core Sample At Its Receiving Status To Collect Or Load And Store Easily.

Only n, h And p Sizes Are Available For The Triple Tube Coring System.

Product name

Product series and material code

Boq

Head Assembly

20701000

Spearhead Point

20701001

Detent Plunger

20701002

Compression Spring

20701003

Spirol Pin

20701004

Spearhead Base

20701005

Latch Retracting Case

20701006

Spirol Pin

20701007

Nyloc Bolt

20701008

Washer

20701009

Latch Compression Spring

20701010

Upper Latch Body

20701011

Latch

20701012

Link

20701013

Spirol Pin

20701014

Stainless Steel Ball

20701015

Landing Indicator Bushing

20701016

Shut-off Valve

20701017

Pump-in Lip Seal

20701018

Spindle Bushing

20701019

Landing Shoulder

20701020

Lower Latch Body

20701021

Hex Nut

20701022

Spindle

20701023

Shut-Off Valve,Hard

20701024

Valve Adjusting Washer

20701025

Thrust/Hanger Bearing

20701026

Spindle Bearing

20701027

Compression Spring

20701028

Stover Lock Nut

20701029

Inner Tube Cap

20701030

Grease Fitting

20701031

Stainless Steel Ball

20701032

Check Valve Body

20701033

EZY Lock Over-Shot Assembly

20701100

Bolt, Cable Swivel Eye

20701101

Cable Swivel Collar

20701102

Thrust Bearing

20701103

Castle Nut

20701104

Cotter Pin

20701105

Grease Fitting

20701106

Cable Swivel Body

20701107

Jar Staff

20701108

Jar Tube

20701109

Hex Nut

20701110

Washer Nord-Lock

20701111

Cap,EZY Lock Over-Shot

20701112

Spring,EZY Lock Over-Shot

20701113

Sleeve,EZY Lock Over-Shot

20701114

Compression Spring

20701115

Ball

20701116

EZY Lock Over-Shot Head

20701117

Compression Spring

20701118

Lifting Dog

20701119

Plain Pin

20701120

Spirol Pin

20701121

Locking Pin

20701122

Nylok Set Screw

20701123

Locking Sleeve

20701124

Stop Ring

20701201

Core Lifte

20701202

Core Lifter Case

20701203

Locking Coupling Stabilizer, Carbide

20701301

Adapter Coupling

20701302

Landing Ring

20701303

Stabilize Inner-tube

20701304

Protector, Outer-tube Thread

20701305




Jinan Allianz machinery Co.Ltd

 JINAN ALLIANZ MACHINERY CO.,LTD is located Jinan City,Shandong province,is a collection of core drilling rig ,water well drilling machine and compost turner design, manufacture and installation of an integrated enterprise.The company was founded in 2012, the head office in China, branch offices and service center are located in Moscow, Vladivostok(Russia),Almaty( Kazakhstan), Bishkek (Kyrgyzstan).Company has its own R & D team, can undertake OEM design, modification service.We are served our clients from over 12 countries with more than 26 mining projects.With our professional and customized drilling solutions, durable and reliable machinery performance, 24/7 stand-by service and technical support, we have earned our reputation worldwide. We send our warmest welcome to all our business partners around the world to come and visit us at any time of convenience.

Company Info

  • Company Name: Jinan Allianz machinery Co.Ltd
  • Representative: LI AIYING
  • Product/Service: Coring Drill Rig , Coring Drill Rod , Water Well Drill Rig , Drill Bit , Multipurpose Drill Rig , Drill Tools
  • Capital (Million US $): 500000RMB
  • Year Established: 2012
  • Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
  • Export Percentage: 61% - 70%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 3
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: China.250022.Shandong.Jinan City.Huaiyin District.Jingshi Road NO.24566.
  • Contact Person: Mr. LIU
  • Tel: +86-531-87188351
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters